motorsfull.blogg.se

1. #ZOSI VIEW CLEAR THE HARD DRIVE HOW TO#
2. #ZOSI VIEW CLEAR THE HARD DRIVE INSTALL#
3. #ZOSI VIEW CLEAR THE HARD DRIVE MANUAL#

Once you select the channel you will copy the settings to, select the “Copy” button. Select the channels you will copy the settings to by using the “Apply Settings To:” drop down menu. Copy Button: Copy the settings for one channel to other channels.Light blue boxes, as pictured, indicate that the DVR will be recording during that time. Double click on a one hour block to set the schedule for that day. Scheduling Grid: Each box on the grid represents one hour, from left to right, starting at 12AM – 1AM, and ending at 11PM-12AM.Channel List: Select the channel you wish you schedule from the drop down list.So, selected boxes are marked light blue, which indicates that the DVR will only be recording if motion is detected during the times indicated. If yes, then there’s no need to change anything. Navigate again to DVR’s Main Menu > Setup > Schedule > Motion to check if all channels wereĬovered with blue. Go to DVR’s Main Menu > Setup > Alarm > Motion > Trigger > To record and check whether you enabled the record. Tick the enable box to enable the motion detection mode. Then go to DVR’s Main Menu > Setup > Alarm > Motion Detection to enable the channel you want to set up motion detection, and edit the area for the channel.

#ZOSI VIEW CLEAR THE HARD DRIVE MANUAL#

If you want to turn off manual recording, and leave the DVR to record only when it detects motion, you can follow up the below steps to the motion recording.

#ZOSI VIEW CLEAR THE HARD DRIVE HOW TO#

How to set motion detection recording on a Zosi DVR or NVR Or you can move the mouse arrow to the grid area, then double click the left button on the mouse, you will find the schedule, you can add the time period manually.Īfter that, you will find a blue icon on the channel when it starts recording.

After finishing, please click “Apply” to save the settings. If you want to use the same settings for other channels, select the channel, then click “ Copy“. The time that is covered by blue is the time of video recording. Set time period: please click the edit button on the upper right corner, then select the corresponding time to click the grid, you will find the grid is covered with blue. Select the channel you want to set up schedule recording. Then to DVR’s Main Menu > Setup > Schedule to set up schedule recording. The idea is that you can set the security system to record only on certain time frames that you’re interested in. If you want to turn off manual recording, and set the timer for Schedule, you can follow up the below steps to set up. Record on certain schedule (Schedule Record Mode) Select “ Start Record“.Īfter that, you will find a green icon on the channels you selected to record, the system will record all the time. Return to the main menu, you will find the “Start Record” / “Stop Record” button. Go to DVR’s Main Menu > Setup > Record to enable the channels you want to record. If you want the system system to record 24/7 ( continuous mode), you need to set up the record manually. How to set continuous recording on a Zosi DVR or NVR After formatting,click “Apply” to save the settings. Tick the hard disk’s ID, then click “ Format” to format the hard drive. Go to the DVR’s Main Menu > Disk Management to format the hard drive.

The max hard drive size supported by Zosi DVRs is 6TB.Īlso, keep in mind that these recorders can’t support the external hard drive to record, and without a hard drive, it cannot record and playback. You must use a surveillance hard drive for your security system.

#ZOSI VIEW CLEAR THE HARD DRIVE INSTALL#

How to set motion recording on a Zosi DVR or NVR Install and Format the hard driveįirst of all, make sure you have installed an internal hard drive inside your DVR/NVR.

These instructions work for the following Zosi models: The same instructions are the same across any Zosi DVR, regular NVR, PoE NVR or Wireless NVR. This guide shows how to set a Zosi DVR or NVR to record motion detection or on continuous mode and how to playback the recordings as well.